|
Powder Room
Solutions Ltd proudly presents the only High-Speed surface
mounted ADA compliant hand drier in the market, available in
three different models.
Speedflow energy efficient
hand dryers
“The most
competitively priced heavy duty hand drier on the market”
- Dries hands in 10 to
15 seconds
- Protrudes less than 4 inches from the wall in
compliance with ADA requirements
- Universal voltage out of the box. Voltage range from
110 to 240V
- High-speed motor can be adjusted manually to reduce
noise levels
- Available in 4 popular finishes
- Vandal resistant – surface mounted
- Great for renovation projects as screw holes match
most other popular models
- 2 Years limited warranty
|
|
Chart on the saving in Electricity by using the
Speedflow Dryer compared to a traditional hand dryer.
|
 |
Speedflow Hand Dryer
- Steel white epoxy finish + Satin Finish / Polished
Chrome
Size H 11.5/8"x W 10 1/2" x D 4"
FINALLY HIGH SPEED AT A COMPETITIVE PRICE! with a drying
time of just 10 - 15 seconds (versus up to 35 seconds
for competitive products) combined with a modest price
point.
Powder Room Solutions Limited, has eliminated a
purchasing managers dilemma of a trying to decide
weather to purchase an expensive, large high output hand
dryer or going with an inexpensive unit with poor
performance. With the new SPEEDFLOW dryer you get both!
high speed at competitive price.
 |
The exterior design of the
Speedflow
makes it ideal not only for use in the most modern surroundings
but also, in response to the challenge of functionality for
every user, we have created a (wall mounted) dryer which
protrudes less than 4 inches from the wall in compliance with
ADA requirements.
Not only have we put an emphasis on innovation in its exterior
design, we have also patented a new design for the interior
scroll so the airflow progressively increases from intake to
outlet, which allows the optimum ratio between flow
characteristics and the machine’s size. Considering the
different intensities of use that hand dryers may be subject to,
the SPEEDFLOW has been designed so the motor revolutions can be
adjusted manually. We can therefore set the dryer to the most
suitable airflow and sound level for the place where it is going
to be installed. Clients can customize the dryer for use in
areas of heavy traffic or in areas where the noise level is an
important factor, such as office buildings or schools/hospitals.
The dryer also features an automatic voltage adjustment which
means it can be used equally (Universal Voltage) at 110-120 V or
220-240 V.
|
Our meticulous selection of
materials and components means that all this is possible
without relinquishing the fundamental safety of the
dryer. Both the motor and the resistance have thermal
limiters which protect them from overheating.
The dryer also has an automatic fixed target detector
which means it turns off automatically after 60 seconds
of continuous use. |
 |
To find out more about the SPEEDFLOW,
and to place an order, please visit
www.powderroomsolutions.co.uk
|
