Predictor is more than 99% accurate and is easy to use. Predictor can be used at any time of the day, from the day your period is due.

How To Perform The Test

Take the test out of the foil wrapper (you don’t need the small sachet, this is just to keep the test dry). Take a moment to familiarise yourself with the test by comparing it to the picture above.
 

	Pull the stick out of the cartridge. Hold the pink urine absorber in your urine stream for at least one second.
	Put the stick back into the cartridge. Make sure that the test is closed completely. Lay the stick down flat with the windows facing you and wait four minutes before reading the result.
The Test Is Working	You will soon see a pink colour moving across all windows. This shows that the test is working.
Predictor's unique extra check for greater reassurance   Once a result has appeared in the result (middle) window and the extra check window (left) has cleared, the result is ready to be read. Reading The Result Ensure that you hold the test stick with the handle on the right hand side as shown in the images below. Once you have completed your test, your result will appear in four minutes. A pink dot will have appeared in the control window to show that the test has worked and is ready to read.
	If there is a pink dot in the result window after 4 minutes, you are pregnant. Even if this dot is very pale pink, it still means you are pregnant.
	If after 4 minutes there is no pink dot in the result window, you are not pregnant.

NEXT PAGE >>>